SHENZHEN UNEME TECHNOLOGY CO.,LTD
Technical innovation，Managerial innovation，Service innovation
Add to Cart
OEM Rechargeable Li Polymer Battery 3.7V 200mAh 322035 Lipo Batteries for Bluetooth Headset
-----Factory Outlet, OEM Provider
Rechargeable Li Polymer Battery Advantages
1). High quality rechargeable lithium polymer battery
2). High-energy density
3). Light weight
4). Low self-discharge
5). Low internal resistance
6). Long cycle life, chargeable up to 500 or 1000 times
7). No memory effect
8). Doesn't contain Mercury, No fire, No explosion, No leakage
9). Thickness can be adjusted while width and height keep the same
Our Advantages
1) Cells: A grade cells to make sure batteries in high and full capacity.
2) High energy density.
3) Protection: Dual IC chips, that can anti-shortcircuit, anti-overcharger, anti-overcurrent,anti-overload.
4) Long life cycle, No memory, environment friendly.
5) Certifications : MSDS, RoHS, ISO9001. (Other is available)
Our Service
1). Professional lithium ion battery pack for over ten years,and have our own factory.
2). Strong R&D team to support.
3). Offer OEM service for customer's order.
4). Quick reply and action.
5). Competitive price, good sale and after-sales service.
| Model | SH322035 3.7V 200mAh Rechargeable Lipo Battery |
| Nominal voltage | 3.7V |
| Nominal capacity | 200mAh |
| Size | thickness × width × length (mm) |
| Max : 3.4*20.5*37mm (With PCM) | |
| Advantage |
|
| Weight | about 7.0g |
| Max charge current | 1C |
| Charging method | charge with constant current 1C to 4.2V,then charge with constant voltage 4.2V, till charge current less than 0.01C |
| Max discharge current | 1C |
| Discharge cut-off voltage | 3V, the over-discharge detection voltage of PCM |
| Operating environment | Charging, 0°C ~ 45°C ; 65±20%RH |
| Discharging, -20°C~45°C ; 65±20%RH | |
| Storage environment | -5~45°C |
| 65±20%RH | |
| storage for a long time(>3 months) and the storage condition shall be:23±5°C;65±20%RH; | |
| CycleLife (80% Prime Capacity) : | >500times |
| Charging Attention | Charging current and charging voltage should be less than specified in the Product Specification. |
| The charger shall be designed to comply with Specification. |
